JDM Tackle Guide

Alpha Tackle model codes explained

Alpha Tackle does not publish a table of what its model codes mean — we checked the official site and found none. So we did not guess. Instead we took the obvious readings of the numbers in each code and tested them against the length Alpha Tackle itself publishes for every size we list. What survived that check is below.

Rod codes — read against Alpha Tackle’s own length figures

We compared every rod code we list with the length Alpha Tackle publishes for it. 512 of 626 sizes (82%) are explained by the readings below, to within 3 cm. The rest do not follow either pattern, and we leave them alone rather than invent a meaning.

The letter at the end

Alpha Tackle does not publish what L, ML, M, MH or H stand for. What it does publish is the rating for each rod, so here is the range those letters actually carry across Alpha Tackle’s own spec tables.

MH 86 sizes
lure rating seen: max 60 g (2.1 oz) · max 45 g (1.6 oz) · max 80 g (2.8 oz)
M 62 sizes
lure rating seen: max 40 g (1.4 oz) · 30 g (1.1 oz) · max 35 g (1.2 oz)
H 50 sizes
lure rating seen: max 28 g (0.99 oz) · max 60 g (2.1 oz) · max 100 g (3.5 oz)
ML 28 sizes
lure rating seen: 23 g (0.81 oz) · 8–20 g (0.28–0.71 oz) · max 160 g (5.6 oz)
L 19 sizes
lure rating seen: 1–7 g (0.04–0.25 oz) · 15 g (0.53 oz) · 0.9-7 / 1/32-1/4

These are the ratings most often seen against each letter in this site’s data, not an official Alpha Tackle definition. The same letter means something different on a trout rod and on a jigging rod, so always check the rating printed on the model page.

Specs for every size

Open a series page to see weight, gear ratio and line capacity for every size in both metric and imperial.